- Contact Person : Ms. Ouyang Lucky
- Company Name : Shenzhen Sunshine LED Limited
- Tel : 86-755-15889657119
- Fax : 86-755-23410662
- Address : Guangdong,Shenzhen,5F,B Building,DaTian Printing Factory,5th Industrial Area,TianLiao Village,GongMing Town,Bao'an District,Shenzhen, China
- Country/Region : China
- Zip : 518108
RGB Touch LED Controller
Related Product Searches:RGB Touch LED Controller,High Quality Touch LED Controller ,Touch LED Controller RGB Touch LED Controller
RGB Touch LED Controller
Touch RGB LED Controller adopts the advanced micro control unit,it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light,flexible light strip, wall washer lamp, glass curtain wall light and so on; At the same time,it has many advantages such as convenient connection,simplicity to use and others. According to the actual need of customers,it can carry out jumpy changing,gradual changing,stroboflash and other effects of change.
*Technical Parameters
---Working temperature: -20-60 °C---Supply voltage: DC12V, 24V <optional> (for orders specify voltage)---Output: 3 channels---Connectiing mode: common anode---Transmission/Receiving frequency: 433.92 Mhz---External dimension: L86.5Χ W55.6 Χ H22.8 mm---Packing size: L88Χ W88 Χ H156mm---Net weight: 170g---Gross weight: 215g---Output current: <6 A (each channel)---Output power: 12V: <216W, 24V: <432W
Operating Instructions(remote control is touching button)1.Touch ON/OFF button,you can switch on/off the RGB strip2.Slide the color ring ,RGB strip will show the same color.3.Increasing color button can adjust the current color to the most vivid,decreaing color button is contrary ,until pure white.4.you can adjust the brightness by dimming function, to brighten and dim the light.5.Gradual change mode : touch on buttn again under monochrome mode condition ,RGB strip will be changed into gradual change mode. increaing color button will speed up the color change ,decreasing color button will slow down.6.Hopping mode7.Under Gradual change or hopping mode , touching on switch will change one to the other .close the RGB strip and restart it if you want to enter monochrome mode . Attentions:1.Input voltage of remote control must be the same as RGB strip`s .2.Match the color of output wiring when connecting.3.When the color doesn`t match , for example , it displays blue when touching green , or displays green when touching blue , please check whether the wiring is correct . in this case ,exchange blue and green .Factory picture
